Auxbeam 12 Inch LED Light Bar 72W 7200lm Light Bar Combo Beams 24pcs 3W Cree Chips Waterproof with Wiring Harness

Auxbeam - Introduction: high quality diecast aluminum housing, durable to withstand any harsh conditions low power consumption, military, dustproof, great performance of waterproof, shockproof wide operating voltage: it can apply to different kinds of truck, 4x4, off-road vehicles, high lumen output Longer valid irradiation distance than normal halogen bulb Advanced Vertical fin design for maximum heat dissipation IP67 rated construction, mining and heavy equipment etc Technical Specification: Power: 72W 24pcs*3w high intensity CREE LEDs Operating Voltage: DC 9-32V Luminous Flux: 5040lm~7200lm Beam Type: 30 degreespot beam& 60 degreeflood beam combo Color Temperature: Pure White 6000K Waterproof Rate: IP67 Working temperature: -40~85 degree centigrade Dimensionwith bracket: Approx 302*106*64mm/11.

89*4. 17*2. 52inch material: black diecast aluminum housing, treedozer, engineering vehicle excavator, car, PC lens Mounting Bracket: Stainless steel bracket Above 30, SUV, truck, 000 hours life time Certified by CE & ROHs Applications: Off-road vehicle, road roller and crane etc. Many indoor and outdoor uses: garden lighting, Back-up Light, SUVs, Off Road Lighting, Backyard Lighting, Trucks, Construction Lighting and so on.

Auxbeam 12 Inch LED Light Bar 72W 7200lm Light Bar Combo Beams 24pcs 3W Cree Chips Waterproof with Wiring Harness - Special vehiclefire engine, trains, rescue vehicle, boat, bus, military command vehicle forklift, communication vehicle, and tanks etc. Package included: 1x 72w cree led work light bar with necessary mounting kits 12 inch led light bar come with cree chips provideing super broad viewing area, Spot 30 Degree & Flood 60 Degree Combo create the best light beam.

This 12 inch light bar with 7200lm luminous Flux and 24 High Power LED will light up everything you need to see.

More information about Auxbeam

For Light Bar Bull Bar Tube Clamp Roof Roll Cage Holder - LAMPHUS Cruizer LED Off-Road Light Horizontal Bar Clamp Mounting Kit 1"/ 1.5"/ 1.75"/ 2" 2 Clamps Includes Allen Hex Key User-friendly

LAMPHUS - Simplify led light bar installations on your roof rack, bull bar, bull bar, or headache rackThe LAMPHUS Cruizer Horizontal Bar Clamp Mounting Kit makes installing Cruizer off-road light bars or other light bars with 10mm mounting screws onto your roof rack, or headache rack a breeze. Rubber inserts are also included for a snugger fit with a larger range of tube sizes and protect your bars and racks from being damaged during installation.

Features:simplifies the installation of led light bars onto your roof rack, bull bar, 1-1/2", or headache rackcompatible with tubes of 1", 1-3/4" & 2" in diameterFits all light bars with 10mm mounting screwsIncludes Allen Hex KeyPackage Content:2 x Clamp2 x 1” Rubber Insert 2 pc2 x 1-1/2” Rubber Insert 2 pc2 x 1-3/4” Rubber Insert 2 pc2 x 2” Rubber Insert 2 pcDoubled Sided Tape for 2" tubes.

2 x allen hex key add more lights, bull bar, roll cage, less hassle- simplify the installation of led light bars & work lights without drilling any holes in the bodywork; quickly and securely mount LAMPHUS Cruizer Series Light Bars or any other light bar with 10mm mounting screws to your roof rack, or headache rack.

For Light Bar Bull Bar Tube Clamp Roof Roll Cage Holder - LAMPHUS Cruizer LED Off-Road Light Horizontal Bar Clamp Mounting Kit 1"/ 1.5"/ 1.75"/ 2" 2 Clamps Includes Allen Hex Key User-friendly - Almost endless applications- can be used on tubes measuring 1", atvs, 1. 5", trucks, 1. 75" & 2" in diameter; perfect for off-road vehicles, Jeeps, boats, UTVs, farm vehicles & more. Cast aluminum construction- precision-welded from cast aluminum, our clamps are strong & built to last. Comes fully-loaded- includes everything you need to start mounting your favorite LED light bars to your ride, including an Allen Hex Key.

Rubber inserts dampen & protect- rubber inserts for snugger fitment with a wider range of sizes; help dampen vibrations during off-roading and protect your bull bar from being scraped.

More information about LAMPHUS


Similar products



Auxbeam 4" LED Light Bar 18W LED Pods 6Pcs 3W CREE LEDs Off Road Flood Beam LED Driving Lights Waterproof with Wiring Harness Pack of 2

Auxbeam - Protection rate: ip67 color temperature: 6000k material: 6063 aluminum profile, pc lens working life: 50000 hours Certified by CE & RoHs Package Included: 18W LED Work Light x 2PCS Adjustable Mounting Brackets Screws SetAttention: There are two kinds of packing, metal bracket, randomly delivered.

100mm4"*80mm3. 15"*65mm2. 5". Led light bar has low current draw- no harms to battery and save gas, longer valid irradiation distance than normal halogen bulb. It has suitable vertical fins design for better cooling, great performance of waterproof, dustproof, shockproof, Anti-corrosion. Wide operating voltage range: it can apply to different types of trucks, Mining, Military, Off-road vehicles, Boating, 4x4, Farming and Heavy Equipment etc.

Add more lights, less hassle- simplify the installation of led light bars & work lights without drilling any holes in the bodywork; quickly and securely mount LAMPHUS Cruizer Series Light Bars or any other light bar with 10mm mounting screws to your roof rack, roll cage, bull bar, or headache rack. Almost endless applications- can be used on tubes measuring 1", atvs, 1.

Auxbeam 4" LED Light Bar 18W LED Pods 6Pcs 3W CREE LEDs Off Road Flood Beam LED Driving Lights Waterproof with Wiring Harness Pack of 2 - 5", trucks, 1. 75" & 2" in diameter; perfect for off-road vehicles, UTVs, Jeeps, boats, farm vehicles & more. Cast aluminum construction- precision-welded from cast aluminum, our clamps are strong & built to last. Comes fully-loaded- includes everything you need to start mounting your favorite LED light bars to your ride, including an Allen Hex Key.

More information about Auxbeam


Similar products



Auxbeam LED Light Bar 4" 18W LED Pods 6Pcs 3W CREE LEDs 1800LM Driving Lights Spot Beam LED Work Lights Waterproof with Wiring Harness Pack of 2

Auxbeam - They are both certified Auxbeam product, and both have same good quality. 100mm4"*87mm3. 4"*65mm2. 5"; without bracket: approx. Add more lights, less hassle- simplify the installation of led light bars & work lights without drilling any holes in the bodywork; quickly and securely mount LAMPHUS Cruizer Series Light Bars or any other light bar with 10mm mounting screws to your roof rack, bull bar, roll cage, or headache rack.

Almost endless applications- can be used on tubes measuring 1", atvs, 1. 5", trucks, 1. 75" & 2" in diameter; perfect for off-road vehicles, Jeeps, UTVs, boats, farm vehicles & more. Cast aluminum construction- precision-welded from cast aluminum, our clamps are strong & built to last. Comes fully-loaded- includes everything you need to start mounting your favorite LED light bars to your ride, including an Allen Hex Key.

Auxbeam LED Light Bar 4" 18W LED Pods 6Pcs 3W CREE LEDs 1800LM Driving Lights Spot Beam LED Work Lights Waterproof with Wiring Harness Pack of 2 - Rubber inserts dampen & protect- rubber inserts for snugger fitment with a wider range of sizes; help dampen vibrations during off-roading and protect your bull bar from being scraped. 18w led light bar flood off road led light with 6pcs x 3W LEDs chips, total of 18w at 6000K Color Temperature, giving greater visibility without eye fatigue.

4 inch led light bar dimension: with bracket: approx. During this time, you may receive two kinds of mounting brackets. Protection rate: ip67 color temperature: 6000k material: 6063 aluminum profile, boating, off-road vehicles, 4x4, stainless steel bracket, pc lens working Life: 50, Military Mining, 000 hours above Certified by CE & RoHs Wide operating voltage range: It can apply to different types of trucks, Farming and Heavy Equipment etc Package Included: A Pair 4 inch 18W LED Work Light Bar Attention: This product has been upgraded.

More information about Auxbeam


Similar products



Auxbeam LED Light Bar 4" 18W LED Pods 1800LM Flood Beam Off Road Lights Waterproof LED Lights for Trucks Pickup Jeep SUV ATV UTV Pack of 2

Auxbeam 77718286AX - Lumen: 1260~1800lm beam: 60 degree flood beam pattern. High quality 6063 aluminum body, shockproof, mining, military, dustproof, off-road vehicles, boating, durable to withstand any harsh condition low current draw- no harms to battery and save gas longer valid irradiation distance than normal halogen bulb suitable vertical fins design for better cooling great performance of waterproof, 4x4, anti-corrosion wide operating voltage range: it can apply to different types of trucks, farming and heavy equipment etc.

Color temperature: 6000K. Add more lights, bull bar, less hassle- simplify the installation of led light bars & work lights without drilling any holes in the bodywork; quickly and securely mount LAMPHUS Cruizer Series Light Bars or any other light bar with 10mm mounting screws to your roof rack, roll cage, or headache rack.

Auxbeam LED Light Bar 4" 18W LED Pods 1800LM Flood Beam Off Road Lights Waterproof LED Lights for Trucks Pickup Jeep SUV ATV UTV Pack of 2 - Almost endless applications- can be used on tubes measuring 1", atvs, 1. 5", trucks, 1. 75" & 2" in diameter; perfect for off-road vehicles, Jeeps, boats, UTVs, farm vehicles & more. Cast aluminum construction- precision-welded from cast aluminum, our clamps are strong & built to last. Comes fully-loaded- includes everything you need to start mounting your favorite LED light bars to your ride, including an Allen Hex Key.

Rubber inserts dampen & protect- rubber inserts for snugger fitment with a wider range of sizes; help dampen vibrations during off-roading and protect your bull bar from being scraped. 18w led light bar flood off road led light with 6pcs x 3W LEDs chips, total of 18w at 6000K Color Temperature, giving greater visibility without eye fatigue.

More information about Auxbeam 77718286AX


Similar products



KFI Products ATV-SCHS Winch Cable Hook Stopper

KFI Products ATV-SCHS - 2 pull hairpin and release clevis pin from winch hook. Eliminates hook clatter from going down the trail. Reasons to purchase a split Cable Hook Stopper : Eliminates wear and tear on your rollers from the hook. This kfi split cable hook stopper will fit between the two outside rollers on an ATV or UTV winch fairlead.

It weighs 4 Oz. 100mm4"*87mm3. 4"*65mm2. 5"; without bracket: approx. 6 position hook stopper at approx. Protects the winch motor and gears from pulling the cable in to far and bottoming out on the rollers. Eliminates hook clatter from going down the trail. Insert the four bolts and tighten. 5 to stow hook, engage clutch and retract cable onto winch spool until hook is snug against the hook stopper and fairlead.

KFI Products ATV-SCHS Winch Cable Hook Stopper - 2 feet of cable. Once you have one, everyone else that you ride, with will want one. 100mm4"*80mm3. 15"*65mm2. 5".

More information about KFI Products ATV-SCHS


Similar products



Lightronic 2pcs 19mm0.75"/25mm1"/32mm1.25"LED HID Work Light Mounting Brackets Horizontal Bull Bar Mount LED Tube Clamp Roll Bar Cage Holder for 4X4 Offroad Car Truck Jeep

Lightronic - Diameter:19mm/075" with thick liner inserts. Lumen: 1260~1800lm beam: 60 degree flood beam pattern. Color temperature: 6000K. Product specification: Diameter:32mm/1. 25" without liner inserts Diameter:25mm/1" with thin liner inserts Diameter:19mm/075" with thick liner inserts material: strong and light-weighted black aluminum color: Black Product Application: Rubber inserts dampen driving vibration &avoid scraping bullbar surface High quality and Allow to add more lights on vehicle without drilling Fix the light on tube firmly, pre-drilled hole for easy installation Apply to most offroad vehicles, cars, boats, Trucks, farm vehicles etc.

Size with bracket: 99*73*107mm/ 3. 9*2. 87*4. 2inch approx. Diameter:25mm/1" with thin liner inserts. Can work with most led, halogen spotlights/fog lights/driving lights or light bars packing description: pair black bull bar brackets 2 set bolts 1 pc M4 Allen key wrench 2 set different size Rubber Pad Add more lights, HID, roll cage, less hassle- simplify the installation of led light bars & work lights without drilling any holes in the bodywork; quickly and securely mount LAMPHUS Cruizer Series Light Bars or any other light bar with 10mm mounting screws to your roof rack, bull bar, or headache rack.

Lightronic 2pcs 19mm0.75"/25mm1"/32mm1.25"LED HID Work Light Mounting Brackets Horizontal Bull Bar Mount LED Tube Clamp Roll Bar Cage Holder for 4X4 Offroad Car Truck Jeep - Almost endless applications- can be used on tubes measuring 1", atvs, 1. 5", trucks, 1. 75" & 2" in diameter; perfect for off-road vehicles, Jeeps, boats, UTVs, farm vehicles & more.

More information about Lightronic


Similar products



MicTuning LS081502JL Backlit Bumper Lights, Rocker Switch Kit, On/Off LED Light, 20A, 12V, Toggle, Blue

MICTUNING LS081502JL - Wide application: standard 5 pin switch, taillights and auxiliary Lamps, Headlights, Fog Lamps, rated at 20amp/12v and 10amp/24v, available for upgrading most wiring harness to control Led Light Bar, Led Work Lights, etc. What you'll get: 1 year quality guarantee for genuine mictuning 5 pin rocker switch and Lifetime Friendly Customer Service.

Fashion cool illuminated rocker switch mictuning 5 pin rocker switch is a SPST Single Pole Single Throw on-off switch that works like a seesaw, easily turning on or off any lights. Diameter:25mm/1" with thin liner inserts. Once you have one, everyone else that you ride, with will want one. Protection Rate: IP67.

MicTuning LS081502JL Backlit Bumper Lights, Rocker Switch Kit, On/Off LED Light, 20A, 12V, Toggle, Blue - Diameter:32mm/1. 25" without liner inserts. Warranty 1 year quality guarantee for genuine mictuning 5 Pin Rocker Switch and Lifetime Friendly Customer Service. Lumen: 1260~1800lm beam: 60 degree flood beam pattern. Material: strong and light-weighted black aluminum. Diameter:19mm/075" with thick liner inserts. Built-in led light emits perfect beam to light up the pattern when the switch is powered up, which also allows you to clearly catch sight of it in a dark environment, no more fumbles! It comes with little jumper connectors and single connectors all nicely made with ends on them and a rubber protector on the female ends.

More information about MICTUNING LS081502JL


Similar products



Auxbeam Wiring Harness for LED Light Bar 12V 40Amp Fuse Relay ON/OFF Switch 2 Lead 2 Meter Universal

Auxbeam 77707707-01 - Size with bracket: 99*73*107mm/ 3. 9*2. 87*4. 2inch approx. Introduction: universal harness kit with mouse style witch can wire two lights meanwhile dc12v 40a rated automotive relay can be assembled with a dc 24v relaynot supplied blade fuse holder with replaceable 30A fuse Up to 2M of wiring, work light etc Package Included: 1x wiring loom harness kit with fuse and relay Add more lights, less hassle- simplify the installation of led light bars & work lights without drilling any holes in the bodywork; quickly and securely mount LAMPHUS Cruizer Series Light Bars or any other light bar with 10mm mounting screws to your roof rack, roll cage, bull bar, terminal ends on most wires On/off switch with adhesive tape backing for easy mounting Apply to: Off-road driving light, fog light, or headache rack.

Almost endless applications- can be used on tubes measuring 1", atvs, 1. 5", trucks, 1. 75" & 2" in diameter; perfect for off-road vehicles, Jeeps, boats, UTVs, farm vehicles & more. Cast aluminum construction- precision-welded from cast aluminum, our clamps are strong & built to last. Comes fully-loaded- includes everything you need to start mounting your favorite LED light bars to your ride, including an Allen Hex Key.

Auxbeam Wiring Harness for LED Light Bar 12V 40Amp Fuse Relay ON/OFF Switch 2 Lead 2 Meter Universal - Rubber inserts dampen & protect- rubber inserts for snugger fitment with a wider range of sizes; help dampen vibrations during off-roading and protect your bull bar from being scraped. 18w led light bar flood off road led light with 6pcs x 3W LEDs chips, total of 18w at 6000K Color Temperature, giving greater visibility without eye fatigue.

4 inch led light bar dimension: with bracket: approx.

More information about Auxbeam 77707707-01


Similar products



MICTUNING Laser LED Light Bar Rocker Switch ON-OFF LED Light 20A 12V, 5pin, Blue

MICTUNING MIC-LSB1 - Keeps tension on the hook to eliminate the cable becoming loose. Wide application: standard 5 pin switch, fog lamps, taillights and auxiliary Lamps, Headlights, rated at 20amp/12v and 10amp/24v, Led Work Lights, available for upgrading most wiring harness to control Led Light Bar, etc. What you'll get: 1 year quality guarantee for genuine mictuning 5 pin rocker switch and Lifetime Friendly Customer Service.

Package included: 1x Wiring Loom Harness Kit with Fuse and Relay. Working life: 50000 hours. 4 inch 18w led light bar has low current draw- no harms to battery and save gas, longer valid irradiation distance than normal halogen bulb. It has suitable vertical fins design for better cooling, dustproof, shockproof, great performance of waterproof, Anti-corrosion.

MICTUNING Laser LED Light Bar Rocker Switch ON-OFF LED Light 20A 12V, 5pin, Blue - Apply for indoor and outdoor uses, off road lighting, Truck, Construction Lighting, back up light, Backyard Lighting, Trailer Interior and Exterior Lighting, garden, Boat Lighting. Package include: 2pcs 18w lED Light Bars and Mounting Brackets. Eliminates wear and tear on your rollers from the hook. Package included : 1x 5 pin rocker switch 1x jumper wire set 1x diagram add more lights, bull bar, roll cage, less hassle- simplify the installation of led light bars & work lights without drilling any holes in the bodywork; quickly and securely mount LAMPHUS Cruizer Series Light Bars or any other light bar with 10mm mounting screws to your roof rack, or headache rack.

Almost endless applications- can be used on tubes measuring 1", atvs, 1. 5", trucks, 1.

More information about MICTUNING MIC-LSB1


Similar products



MICTUNING MIC-B1002 LED Light Bar Wiring Harness, Fuse 40A Relay On-off Waterproof Switch

MICTUNING MIC-B1002 - Working life: 50000 hours. 4 inch 18w led light bar has low current draw- no harms to battery and save gas, longer valid irradiation distance than normal halogen bulb. It has suitable vertical fins design for better cooling, dustproof, shockproof, great performance of waterproof, Anti-corrosion. Apply for indoor and outdoor uses, back up light, Trailer Interior and Exterior Lighting, Off Road Lighting, Construction Lighting, Backyard Lighting, Truck, garden, Boat Lighting.

Package include: 2pcs 18w lED Light Bars and Mounting Brackets. Eliminates wear and tear on your rollers from the hook. Diameter:25mm/1" with thin liner inserts. Connect the red+/black- wire of the switch to battery or any place of your car system to get power for the switch; 4. Mictuning wiring harness for off road led lights is a perfect accessory for off road vehicles, working vehicles and any automobile that could use a relay to power specific equipment.

MICTUNING MIC-B1002 LED Light Bar Wiring Harness, Fuse 40A Relay On-off Waterproof Switch - Sturdy durability: made of strengthened plastic and well-conductive pins, and all patterns are etched directly onto the switch surface to ensure long lasting durability. Lumen: 1260~1800lm beam: 60 degree flood beam pattern. Diameter:32mm/1. 25" without liner inserts. Sturdy durability: made of strengthened plastic and well-conductive pins, and all patterns are etched directly onto the switch surface to ensure long lasting durability.

More information about MICTUNING MIC-B1002


Similar products