YITAMOTOR LED Light Bar,2PCS 18W 6Inch Flood LED Work Light Pods Single Row Offroad Led Light Driving Light Fog Light Boat Light Waterproof for SUV ATV 4WD Car Truck Golf Cart 12V 24V,2 Years Warranty

yitamotor - Upgrade pc lens surface with high light transmission 5. Yitamotor is a registered trademark protected by the USA Trademark Law. Any misuse of trademark YITAMOTOR without approval will take legal action. Yitamotor, us based company, Specialized in LED Lights. The lamp can be slid after install the accessory. Extended utility:the led flood light bar is compatible with almost all jeeps, Mowers, trailers, ATVs, Tractors, 4x4, backyard Lighting, Boats.

You are buying directly from the mANUFACTUER!100% Satisfaction Guranteed! Specification: 1. Led power:18w6pcs*3w high intensity LEDs 2. Dimension:160*99*46mm/6. 3"l * 2. 48"h * 1. 81"w 3. Ip rating:IP67 4. Operating voltage:10-30V DC 5. Color temperature:6000KWhite 6. Life span:50, 000 hours 7. Lens material:PC Lens 8. Material:Diecast aluminum housing 9.

YITAMOTOR LED Light Bar,2PCS 18W 6Inch Flood LED Work Light Pods Single Row Offroad Led Light Driving Light Fog Light Boat Light Waterproof for SUV ATV 4WD Car Truck Golf Cart 12V 24V,2 Years Warranty - Beam:flood 60 degree Features: 1.

More information about yitamotor

MICTUNING MIC-B1002 LED Light Bar Wiring Harness, Fuse 40A Relay On-off Waterproof Switch

MICTUNING MIC-B1002 - Package included:1 x wiring harness full wiring kit, 1 x Diagram. This wiring harness is up to 10 feet and with 2 leads can hook up 2 light fixtures, it is universal fit for any 7" 10" 12" 20" 30" 40" light bars, espcially good for light bar within 180w. Mictuning mic-b1002 wiring harness kit with Waterproof Red on/off toggle switch and easy to install.

Details makes perfect:adopt flexible strand copper wire, up to 180 watt load capacity. It is universal fit for any 7" 10" 12" 20" 30" 40" light bars that is within 180w. Great construction:40a power relay and inline blade fuse for multiple safety protection. With 2 lights output connections, it can hook with 2 led work light or 2 small watt led light bar and any else off road LEDs.

MICTUNING MIC-B1002 LED Light Bar Wiring Harness, Fuse 40A Relay On-off Waterproof Switch - 10ft extendable wiring harness:up to 10ft of wiring that is plenty of length to put it where you want. Cautions:we recommend professional installation, we suggest that wrap all exposed wire with electrical tape to avoid a short circuit; Pls make sure your light within power 180W, the harness would melt and even caught a fire, pls let professinal installer to wire the harness kit; If let the wire short circuit, or it would got melt as well.

Connect the white+;black- wire from the relay to light barred/black correspond to the wire of lights bar ; 3. Inline blade fuse & 40A relay - multiple safety protection. Mictuning wiring harness for off road led lights is a perfect accessory for off road vehicles, working vehicles and any automobile that could use a relay to power specific equipment.

What you'll get: 1 yr mictuniNG Warranty and lifetime Friendly Customer Service.

More information about MICTUNING MIC-B1002


Similar products



Nilight LED Light Bar Wiring Harness Kit 12V On Off Switch Power Relay Blade Fuse for Off Road Lights LED Work Light,2 years Warranty

Nilight NI -WA 06 - Product features: 10ft wiring harness, 2 sets of connectors to light fixtures illuminated on/off toggle switch - can easily turn on/off the lights. Blade fuse protects the circuit when overcurrent or short circuit occurs. Illuminated switch: 3 pin on/off rocker switch with red indicator light when truing on, has been passed test of 5, easy to turn on or off, 000 times pressing.

Two available leads: with 2 sets of light output connectors for dual lighting fixtures less than 180W, the connection is more stable. Package include:1 x Wiring Harness Kit, 1 x Instructions,. Circuit protection: power relay-safety protection and conversion circuit. Inline blade fuse & relay - multiple safety protection.

Nilight LED Light Bar Wiring Harness Kit 12V On Off Switch Power Relay Blade Fuse for Off Road Lights LED Work Light,2 years Warranty - Note: maximum wattage: 180w; max ampere: 15a operating Voltage: 12V DC Power Please finish the installation by professionals or install the wiring harness under the guidance of professionals. Mictuning mic-b1002 wiring harness kit with Waterproof Red on/off toggle switch and easy to install. Details makes perfect:adopt flexible strand copper wire, up to 180 watt load capacity.

It is universal fit for any 7" 10" 12" 20" 30" 40" light bars that is within 180w. Great construction:40a power relay and inline blade fuse for multiple safety protection. With 2 lights output connections, it can hook with 2 led work light or 2 small watt led light bar and any else off road LEDs.

More information about Nilight NI -WA 06


Similar products



YITAMOTOR Offroad Driving Light Bar Wiring Harness with Fuse Relay ON/OFF Switch for ATV Fog Light Led Spotlights Up to 180W 12V/40A 8ft

yitamotor - Your satisfaction is backed by our Risk-free 30-Day Money Back Guarantee. Enhanced quality - the yitamotor led light bar wiring Harness features heavy duty 12 gauge wires with waterproof thermoplastic PVC jacket that for better performance. Safe construction - the 8 ft. Quick & easy Installation with flexible 9ft.

Wiring kit. The yitamotor heavy-duty light bar wiring harness is designed to connect a single 10"-30" LED light bar to your Auto electrical system and compatible with any off-road light bar, work light or auxiliary lamp. Circuit protection: power relay-safety protection and conversion circuit. Harness comes equipped with a fuse, relay and illuminated on/off switch.

YITAMOTOR Offroad Driving Light Bar Wiring Harness with Fuse Relay ON/OFF Switch for ATV Fog Light Led Spotlights Up to 180W 12V/40A 8ft - It incorporates an inline fuse holder, a 12V relay, and a waterproof switch. Blade fuse protects the circuit when overcurrent or short circuit occurs. Illuminated switch: 3 pin on/off rocker switch with red indicator light when truing on, easy to turn on or off, has been passed test of 5, 000 times pressing.

Two available leads: with 2 sets of light output connectors for dual lighting fixtures less than 180W, the connection is more stable. Package include:1 x Wiring Harness Kit, 1 x Instructions,. Wiring harness 1 x on/off switch 1 x 40a power relay 1 x 25A Blade Fuse Mictuning mic-b1002 wiring harness kit with Waterproof Red on/off toggle switch and easy to install.

Details makes perfect:adopt flexible strand copper wire, up to 180 watt load capacity.

More information about yitamotor


Similar products



For Light Bar Bull Bar Tube Clamp Roof Roll Cage Holder - LAMPHUS Cruizer LED Off-Road Light Horizontal Bar Clamp Mounting Kit 1"/ 1.5"/ 1.75"/ 2" 2 Clamps Includes Allen Hex Key User-friendly

LAMPHUS - Simplify led light bar installations on your roof rack, bull bar, or headache rackThe LAMPHUS Cruizer Horizontal Bar Clamp Mounting Kit makes installing Cruizer off-road light bars or other light bars with 10mm mounting screws onto your roof rack, bull bar, or headache rack a breeze. Enhanced quality - the yitamotor led light bar wiring Harness features heavy duty 12 gauge wires with waterproof thermoplastic PVC jacket that for better performance.

Safe construction - the 8 ft. Everything you need for installation is included even an Allen Hex Key in this clamp mounting kit!Excellent for off-road vehicle, farm vehicle & other applicationsThis high-quality horizontal bar clamp mounting kit can be used on tubes measuring 1", marine, 1.5", 1. 75" and 2" in diameter.

For Light Bar Bull Bar Tube Clamp Roof Roll Cage Holder - LAMPHUS Cruizer LED Off-Road Light Horizontal Bar Clamp Mounting Kit 1"/ 1.5"/ 1.75"/ 2" 2 Clamps Includes Allen Hex Key User-friendly - Blade fuse protects the circuit when overcurrent or short circuit occurs. Illuminated switch: 3 pin on/off rocker switch with red indicator light when truing on, easy to turn on or off, has been passed test of 5, 000 times pressing. Two available leads: with 2 sets of light output connectors for dual lighting fixtures less than 180W, the connection is more stable.

Package include:1 x Wiring Harness Kit, 1 x Instructions,. Circuit protection: power relay-safety protection and conversion circuit. All were tested rigorously by our professional technician before sells.

More information about LAMPHUS


Similar products



EPAuto LED Light Bar Wiring Harness Kit, 40A Relay / Fuse / ON-OFF Switch

EPAuto AE-005-1 - Illuminated rocker Switch On/Off Rocker LED. Harness comes equipped with a fuse, relay and illuminated on/off switch. Give it a shot, you will never go wrong with our YITAMOTOR 8ft. Attach the black wire to the pin of the switch GOLD colored, route it then connect it to the ground chassis. Blade fuse protects the circuit when overcurrent or short circuit occurs.

Illuminated switch: 3 pin on/off rocker switch with red indicator light when truing on, has been passed test of 5, easy to turn on or off, 000 times pressing. Two available leads: with 2 sets of light output connectors for dual lighting fixtures less than 180W, the connection is more stable. Package include:1 x Wiring Harness Kit, 1 x Instructions,.

EPAuto LED Light Bar Wiring Harness Kit, 40A Relay / Fuse / ON-OFF Switch - Wiring kit. Add more lights, less hassle- simplify the installation of led light bars & work lights without drilling any holes in the bodywork; quickly and securely mount LAMPHUS Cruizer Series Light Bars or any other light bar with 10mm mounting screws to your roof rack, roll cage, bull bar, or headache rack.

Almost endless applications- can be used on tubes measuring 1", 1. 5", boats, jeeps, 1.75" & 2" in diameter; perfect for off-road vehicles, ATVs, trucks, UTVs, farm vehicles & more. Cast aluminum construction- precision-welded from cast aluminum, our clamps are strong & built to last. Comes fully-loaded- includes everything you need to start mounting your favorite LED light bars to your ride, including an Allen Hex Key.

More information about EPAuto AE-005-1


Similar products



Nilight LED Light Bar Wiring Harness Kit 12V On off Switch Power Relay Blade Fuse for Off Road LED Work Light Bar,2 years Warranty

Nilight NI-WA05 - Compatible with power source from 10 to 30 Volt DC. 12ft wiring harness: more than 12ft of wiring from the switch to lights, also is extendable, run the harness to your desired lighting location. Two available leads: with 2 sets of light output connectors for dual lighting fixtures less than 180W, the connection is more stable.

Illuminated switch: 3 pin on/off rocker switch with Red Indicator light when truing on, easy to turn on or off, long service life. Efficient protection: power relay and inline blade fuse ACT as the first Line of defense against overcurrent and short circuit. Package include: 1 x 12ft wiring harness, 1 x instructions.

Nilight LED Light Bar Wiring Harness Kit 12V On off Switch Power Relay Blade Fuse for Off Road LED Work Light Bar,2 years Warranty - Power Relay 3. Enhanced quality - the yitamotor led light bar wiring Harness features heavy duty 12 gauge wires with waterproof thermoplastic PVC jacket that for better performance. Safe construction - the 8 ft. Blade fuse protects the circuit when overcurrent or short circuit occurs. Illuminated switch: 3 pin on/off rocker switch with red indicator light when truing on, has been passed test of 5, easy to turn on or off, 000 times pressing.

Two available leads: with 2 sets of light output connectors for dual lighting fixtures less than 180W, the connection is more stable. Package include:1 x Wiring Harness Kit, 1 x Instructions,. Harness comes equipped with a fuse, relay and illuminated on/off switch.

More information about Nilight NI-WA05


Similar products



LED Light Bar, Northpole Light 2 Pack 18W CREE Flood LED Pods LED Work Lights Driving Fog Lights for Off-road, Truck, Car, ATV, SUV, Jeep

Generic generic - Harness comes equipped with a fuse, relay and illuminated on/off switch. Easily connects any lighting accessory to its power source by tapping into the battery directly. For all your lights - with up to 180w load capacity, hid or halogen off-road light bar, this wiring kit is compatible with any LED, work light or auxiliary light.

Money back guarantee - making you a happy customer is our guideline. Circuit protection: power relay-safety protection and conversion circuit. 2 sets of power connectors to light fixtures. 2x high powered flood led work light bar, 6 x 3 watt high power Cree White LEDs at 6, 000K color temperature with 1980 Lumens.

LED Light Bar, Northpole Light 2 Pack 18W CREE Flood LED Pods LED Work Lights Driving Fog Lights for Off-road, Truck, Car, ATV, SUV, Jeep - Tough design: black painted high quality aluminum housing, dustproof, stainless steel adjustable mounting bracket and shatterproof lenses with IP67 waterproof, durable to withstand any harsh condition. Give it a shot, you will never go wrong with our YITAMOTOR 8ft. Others: boat, yacht, road/ street lamp, courtyard lamp, fishing, etc.

Engineering vehicles: excavator, road roller, crane, bulldozer, fork lift and mining truck etc. Compatible with power source from 10 to 30 Volt DC. 12ft wiring harness: more than 12ft of wiring from the switch to lights, also is extendable, run the harness to your desired lighting location.

More information about Generic generic


Similar products



yueton 12pcs Car Truck Rocker Round Toggle LED Switch On-Off Control, Blue, Green, Yellow, Red

Blovess - Give it a shot, you will never go wrong with our YITAMOTOR 8ft. All were tested rigorously by our professional technician before sells. Easy installation - using red and black color code for easy hook up, this harness is flexible enough for mounting. Input: 12v, 20A. Led toggle switch on-off control pack of 12 light color: blue, 20a type: 2 pins 3 pins with led, red size: 23*30mmd*h Material: plastic+metal Input: 12V, yellow, green, SPST: ON-OFF Mictuning mic-b1002 wiring harness kit with Waterproof Red on/off toggle switch and easy to install.

Details makes perfect:adopt flexible strand copper wire, up to 180 watt load capacity. It is universal fit for any 7" 10" 12" 20" 30" 40" light bars that is within 180w. Great construction:40a power relay and inline blade fuse for multiple safety protection. With 2 lights output connections, it can hook with 2 led work light or 2 small watt led light bar and any else off road LEDs.

yueton 12pcs Car Truck Rocker Round Toggle LED Switch On-Off Control, Blue, Green, Yellow, Red - 10ft extendable wiring harness:up to 10ft of wiring that is plenty of length to put it where you want. Cautions:we recommend professional installation, the harness would melt and even caught a fire, We suggest that wrap all exposed wire with electrical tape to avoid a short circuit; Pls make sure your light within power 180W, pls let professinal installer to wire the harness kit; If let the wire short circuit, or it would got melt as well.

Universal fit: compatible with all automobiles, boats and devices equipped with a 12V power source. Enhanced quality - the yitamotor led light bar wiring Harness features heavy duty 12 gauge wires with waterproof thermoplastic PVC jacket that for better performance.

More information about Blovess


Similar products



LED Light Bar YITAMOTOR 2Pcs 4Inch 27W Round LED Light Pods Work Light Flood Beam Off Road Driving Light Fog Lights Waterproof for Jeep Truck Car Boat Motorcycle ATV SUV 4WD 12V 24V,2 Years Warranty

YITAMOTOR - Light color: blue, yellow, green, red. Pack of 12, 3 for each color. Yitamotor is a registered trademark protected by the USA Trademark Law. Any misuse of trademark YITAMOTOR without approval will take legal action. Yitamotor, us based company, Specialized in LED Lights. Ajustbale mounting bracket:With adjustable mounting bracket, which makes changing direction of light beam easier.

2x high powered flood led work light bar, 6 x 3 watt high power Cree White LEDs at 6, 000K color temperature with 1980 Lumens. Circuit protection: power relay-safety protection and conversion circuit. Great performance of waterproof, shockproof and anti-corrosion in extreme weather condition. Long lifespan: eco-friendly low power consumption design with integral heatsink for longer lifespan, rated at 30, 000 hours.

LED Light Bar YITAMOTOR 2Pcs 4Inch 27W Round LED Light Pods Work Light Flood Beam Off Road Driving Light Fog Lights Waterproof for Jeep Truck Car Boat Motorcycle ATV SUV 4WD 12V 24V,2 Years Warranty - Dc 10v-30v operating voltage range: it can apply to different types of trucks, Off-road vehicles, SUV, 4x4 Jeep, Mining, Boating, Farming and Heavy Equipment etc. Package contents: 2x northpole light 18w waterproof Cree Flood LED Light Bar, Adjustable Mounting Brackets, Screws Set and 12 Month Worry-free Warranty.

Type: 2 pins 3 pins with LED;. Easily connects any lighting accessory to its power source by tapping into the battery directly. For all your lights - with up to 180w load capacity, this wiring kit is compatible with any LED, hid or halogen off-road light bar, work light or auxiliary light. Money back guarantee - making you a happy customer is our guideline.

More information about YITAMOTOR


Similar products



4PCS Waterproof Car COB LED 12V Lights High Power DRL Daytime Running Fog Driving White Lamp

- Better heat dissipation:special designed die-cast aluminum alloy heat sinks effectively extend the lifespan of the light bar to over 50, 000 hours. Enhanced quality - the yitamotor led light bar wiring Harness features heavy duty 12 gauge wires with waterproof thermoplastic PVC jacket that for better performance.

Safe construction - the 8 ft. Easy installation, easily stick on with self-adhesive tape. Give it a shot, you will never go wrong with our YITAMOTOR 8ft. All were tested rigorously by our professional technician before sells. Easy installation - using red and black color code for easy hook up, this harness is flexible enough for mounting.

4PCS Waterproof Car COB LED 12V Lights High Power DRL Daytime Running Fog Driving White Lamp - Specification: - voltage: dc 12v - power: 6w - colour: xennon white 6000k-6500k - luminous Flux: 500lm - Material: Aluminum + COB - Housing color: Black - Size: 17. 3cm x 1. 7cm x 03cm features: high power COB SMD LED light bulb, slim design. Your satisfaction is backed by our Risk-free 30-Day Money Back Guarantee.

2 pack:4inch off road round led work light with 9pcs x 3 watt high power LEDs, Lighting the entire forward viewing area, 000K Color Temperature, total of 27W at 6, which will give you comfortable and safe driving entertainment. High performance :diecast aluminum housing for strength and durability.

More information about


Similar products